SURFACE PREPARATION: Surface must be clean and dry (free from all dirt, oil, wax and polish). Nails and screws should be countersunk and filled with Aqua Coat Wood Putty. Sand the surface thoroughly with fine sandpaper and remove all dust with a vacuum, forced air or damp cloth (water).
DIRECTIONS FOR USE: Spray, brush or wipe Aqua Tone Clear Stain Base to cleaned, raw wood. A second coat of Aqua Tone Clear Stain Base may be applied within 30 minutes. Allow 1 hour before staining with Aqua Tone Wood Stain.
KEEP FROM FREEZING.