Quality Wood Finishes, Made in the USA

Aqua Coat Clear Grain Filler RETAIL PACK


$ 0.00

This Aqua Coat Clear Grain Filler RETAIL PACK includes...

-6 Pints & 2 Quarts  


Easy-to-sand clear gel wood grain filler for filling the pores in woods (such as oaks, mahogany, ash, and hard-to-fill woods). Can be used on raw wood or after staining, sealers, or topcoats. For a finish as smooth as glass.

Refinishing your kitchen cabinets or upcycling furniture? Get a smooth, glass-like finish with this professional method: de-gloss, sand, apply 2-3 coats of Aqua Coat Clear Grain Filler, sand lightly, then follow with primer and paint. People who used our grain filler when refinishing their cabinets love it:

"Easy product to use. Easy cleanup."

"Easy to use, no offensive odor, and does its job by filling in the grain."

Ideal Customers For Clear Wood Grain Filler

  • Cabinet refinishers
  • Furniture makers
  • Luthiers
  • Gun stock finishers
  • Cabinet makers
  • Piano restoration
  • Antique restoration
  • DIY woodworking hobbyists 

Ideal for using as a wood grain filler on:

  • Tabletops
  • Pianos
  • Cabinets
  • Guitars  and other wood instruments

 Allow 3 to 7 days shipping.


Clear Wood Grain Filler Benefits

  • Grain Filler dries in 30-45 minutes for a faster build
  • Crystal clear when dry
  • Easy sanding
  • Nonflammable
  • Low odor and low VOC
  • Can be tinted with water-soluble colorants or dyes
  • Can be thinned with water
  • More OSHA-friendly than solvent-based
  • Lower insurance premiums
  • Minimal shrinkage                                           
  • Water clean-up


Clear Wood Grain Filler Directions For Use

Surface Preparation: Surface must be clean and dry (free from all dirt, oil, wax and polish) before using the Aqua Coat Clear Wood Grain Filler. Sand surface thoroughly. Remove all dust with a vacuum, forced air or damp cloth (water).

Directions For Use: Aqua Coat Clear Wood Grain Filler should be applied after the piece is stained, and/or a seal coat (Aqua Coat “X-119” Sanding Sealer) has been applied.

  • Stain and seal coat must be dry and lightly sanded with 220-grit or finer sandpaper.
  • Grain Filler can be tinted with water-soluble colorants or dyes.
  • If no stain or seal coat is used, you may apply Clear Grain Filler to the raw wood.
  • Grain Filler may be applied with a soft cloth, using a circular motion, much like applying a paste wax. Or work Grain Filler generously into open wood grain pores with a small squeegee or flexible putty knife.
  • Inspect to see if the grain is completely filled, then scrape or squeegee to remove excess.
  • Let dry 30-45 minutes, then lightly sand with 320 grit paper.
  • If grain is not completely filled, repeat the application process.
  • 2-3 coats of Grain Filler are recommended.
  • Allow over­night dry time and lightly sand before applying top coats.



  • PayPal